A question about business hosting rss-feeds I just installed Liferea and when I click one of the news in it I get like two rows

Related Topic:

Guys, I dont want GRUB

Hi, is it possible to find the mac-addr of a computer that is over an VPN tunnel. The client (10.0.1.2) is opening a page on 10.0.10.1 but i want to show the mac-addr for the client on 10.0.10.1. Im reading the 'arp table' via 'arp -a' but it only shows the last router, before 10.0.10.1

I just want to get to linux through switching my bios config

like where do i enter it? trying to install ubuntu on another old laptop

10.0.10.1 and it's showing the MAC for 10.0.5.1 :/

Is that even possible?

i dont need wireless help i just need help mounting the module(ndiswrapper)

im trying to give an internal ip to my father laptop that is visiting me, so he can share the internet connection :]

settings for getting internet through sify ISP work.......!!

modprobe -i ndiswrapper and pray

if you dont want grub u cant boot secure linux web hosting that like saying i want xp but no ntldr

you're probably gonna have to install Grub to either the MBR of hte usb drive(might work), or use the super grub disk, and copy it to a floppy..

Hello, all!

he just doesnt want grub on the MBR of his main drive

yup, dlete te correspondng line from /etc/fstab and umount it.

stefg fantastic. Thank you

oh.. should have read a bit more

oh, in that case, just edit the sample dhcpd.conf to give out an appropriate address. although frankly, dhcp is probably overkill for a temporary situation like this
boh, in that case, just edit the sample dhcpd.conf to give out an appropriate address. although frankly, dhcp is probably overkill for a temporary situation like this/b

anyone know if it's possible to use sftp w/ a username containing an @ symbol?

lol,

I have a question about Ubuntu 6.06?

thanks, im in windows right now but i have a feeling that wont work

Ok, I have two harddrives, hda (Windows partition takes up all of it) and hdb (30gb USB Drive)

can someone help me to get my wireless work? a Broadcom 4318. PM me... Thanks

what would be the best/easier setup?

I dont want anything to do with the windows drive

just set an ip address appropriate to your internal network, no need to muck about with dhcp

I want all of it no the USB without messing up hda

I have a question about Ubuntu 6.06?

have you bothered with google?
!ask | Linux_Scrub

Don't ask to ask a question. Just ask your question

No.
I dont have a floppy drive

mmmm... how do i do that...? :]

thats gonna be the place to start.

\o/

Sorry, I don't know anything about o/ - try searching on http://bots.ubuntulinux.nl/factoids.cgi

make sure your ip address and that of your father's laptop are on the same subnet, then adjust iptables to forward that connexion

can someone help me to get my wireless work? a Broadcom 4318. PM me... Thanks

try google.

are you familiar with /sbin/ifconfig?

yeah, i was trying to understand what iptables is, i was looking for info on that right now

with a 32bit distro work on a 64 bit core?

then write grub to that disk's MBR say your hard drive is /dev/sda1 and the usb drive is /dev/sda2 just make sure grub writes to /dev/sda2

not much

I was wondering if there is any issues with installing on to SATA HD's. I've found that Gparted can read it?

How do I remove /ignore:s in XChat?

yes, and its probably what you want, even if your hardware supports x64

phalco, is that part of the option in the install?

SATA should be fine

sorry got called away for work

should be fine

Does anyone know why there is no Httpd.conf when I use the package install of apache2

i've just realized it's the only thing that most closely resembles ipconfig from windowze

All I see is apache2.conf why is that????

Is there a trick to getting it to read?

okay, so you've got two ethernet cards in your main pc, one set to whatever ip your isp doles out. set the ip of the second with "ifconfig eth1 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255"

nope, shouldn't be - many controllers are in the kernel

#ubuntu-no

Anyone want to help me out with the Ubuntu Apache2 installation??

on your dad's laptop, set his ip address with "ifconfig eth0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255"

Can I DCC someone? I haven't used IRC in some time and all the text flying by is distracting

Just have a few questions as to why it is installed that why

I dont want grub on my windows drive...
at all

can someone please help me?

where do i enter acpi=force to get the livecd to load on this old computer?

you've made that clear

use lilo

lol

thanks!!!! i will try that!

Indy, I dont mind going in BIOS and changing it so that the USB comes first...

I'm not an Apache expert, but maybe that is a change from Apache 1.x to 2

has anyone installed apache2 using the ubuntu installation package?

hang on, you're not done

I see

and thats fine, but you will still have to have Grub on the USB drive.

but there was alot of talk online about their being a bug

then don't install it to your windows drive, do so on the USB one but your BIOS would need to support booting from USB. An alternative is to use NTLDR to bootstrap an image of a grub MBR, e.g. 512 bytes. You can put it in boot.ini. Google if you want exact steps.

ok, so will putting grub on the usb drive affect my windows drive?

I was wondering if anyone could shed some light on the subject

i never used apache on ubuntu i guess its like on debian, meaing it cuts the config into smaler easyer to read/edit pieces

yes, this other laptop is not ubuntu, its windows

Linux_Scrub, I know of no reasons offhand why 6.06 could not edit a sata drive I have it on 20 machines in work

I already have Win XP installed on the HD. I do have lots of empty space that is unpartitioned. Any suggestions?

it probaly includes a bunch of stuff from /etc/apache2/dumbconfigdir

ah, that's a pity

it shouldn't, problem is, almost all the installers I've saw, installs Grub to the mBR of the main drive by default

What exactly is it that you want light shed on?

server irc.inanelymac.com

Linux_Scrub, 17 of which have sata, one with scsi and one with ide

ok back.

well, set up iptables to forward the connexion, you can easily google for the syntax to do that

yo scales

geez...

PT?

this is horrible...
brb

You can read the docs in /usr/share/doc/apache2

!dualboot | Linux_Scrub

Dual boot instructions: https://help.ubuntu.com/community/WindowsDualBootHowTo (x86/AMD64) - https://wiki.ubuntu.com/YabootConfigurationForMacintoshPowerPCsDualBoot (Macintosh)

I have Fluxbox installed, and when I right click on my Desktop to luanch an app it just has a small box that says Fluxbox on it. How do I fix my install so that I can use it?

!apache2

Sorry, I don't know anything about apache2 - try searching on http://bots.ubuntulinux.nl/factoids.cgi

ill take a look

ok, tks for the help!
!iptables

Ubuntu, like any other linux distribution, has firewall capabilities built-in. The firewall is managed using the 'iptables' command (see https://help.ubuntu.com/community/IptablesHowTo), or GUI applications such as Firestarter (Gnome) or Guarddog (KDE).

good luck

i had that same proble when i tried fluxbox.

Hi all, I need to setup internet file sharing with access control i.e. given user only accesses a defined directory tree, what r the best recommended tools for the Job? webdav or SFTP or others ?

Saludos

I also would like seamless integration with windows explorer

quit

I'm curently using webdav, but don't know how to define finer grained access rules below the main DAV repository

You think the package might be corrupted or something?

andreas--: you shouldn't IRC as root

well, Arab = ape with AIDS ... Jews = ape with syphilis

so i currently believe that madwifi is the driver

you choose

i dont know, but i had the same problem when i tried installing it.
!ops

Help! Mez, LjL, elkbuntu, imbrandon, DBO, gnomefreak, Hobbsee, rob, ompaul, Madpilot, Burgundavia, Seveas, CarlK, crimsun, ajmitch, tritium, Nalioth, thoreauputic, apokryphos, tonyyarusso, PriceChild, Amaranth, jrib, jenda, nixternal, Myrtti or mneptok

IndyGunFreak, ?

ill be right back

barata

Has any one in this chat got Fluxbox to work correctly?

how do i change my user name on irc

i've gotten it to work properly, but i did it by downloading Fluxbuntu..lol

/nick

/nick new nickname

scripter111, /nick newnickaname

thanks

Owch, a new distro is not worth a new desktop enviorment...
I will ask on the forums

how do I start Ubuntu in runlevel 3???????

look for init.d

yes?

I've followed this http://blogs.developerfusion.co.uk/blogs/thushan/archive/2007/02/02/1775.aspx guide to restore my grub menu back after installing windows XP on another partition, but now I don't have windows XP on my grub, any way I can add it?

So if I can't get the install to detect the HD I should download the ISO w. the text version of the installer. If this doesn't work does anyone have a walk around

Azul, yes and then what?

yes, search for init.d in google

!grub | aMMuNix

grub is the default Ubuntu boot manager. Lost grub after installing windows: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows - Making GRUB floppies & other GRUB howtos: https://help.ubuntu.com/community/GrubHowto

it is the thing that allows you to run in level 3

im not really sure never used that in ubuntu but i guess /etc/event.d/rc-default does that somehow.

thanks stefg

pt please

I figure ubuntu only has 2 different runlevles by default

=8BL @CAAO7KG=K9?

what is pt?
pm?

when you look at the script it just checks for inittab (which doesnt exists) and defaults sto 2 (at the end) probably just change that to3

private talk

!ru | pitrovich

pm?

60;C9AB0 2948B5 2 #ubuntu-ru 4;O ?I8 =0 @CAA O7K:5 / Pozhalujsta vojdite v #ubuntu-ru dlq pomoshchi na russkom qzyke

is that better

!pt | ekso

idefixx how what?

problem is, if yuou're not registered, you can't send pms

IndyGunFreak, you can, others just won't get them by default

did you find the script i was talking about?

Hi all, I need to setup internet file sharing with access control i.e. given user only accesses a defined directory tree, what r the best hosting recommended tools for the Job? webdav or SFTP or others ?

idefixx which one?

the one i mentioned when i first hilighted you here in the chan... look above.

how many people will be using the server and what size are the files you want to host?

how can i redirect stderr w/ stdout to a file ?

event.d?

is it like 1&2 or such?

dude there is a path infront of that!

OK Im in that now
idefixx now what?

well look at line 20 it says 'telinit 2' which is the runlev it defaults to. im not sure about this... but i guess that is what makes ubuntu go to rc2.

how would i go about installing synergy on ubuntu desktop?

in any case why do you want to change the runlevel?

wtf is serengy?

TheCougar, it's in repos right?

If I don't have to resize any partitions then 6.06 should create a partition on its own, correct?

running a fileserver gui not needed

sorry synergy
.rpm

yes

has anyone tried the graphical frontend for ndiswrapper?

check this out http://www.picotux.com/

TheCougar, sudo apt-get install synergy it's in the repos

why are you installing 6.06/
?

Indygun, of all the help pages found, there isn't an answer as to why I'm not seeing my SATA HD

unless you are on ubutnu-server my rc3 start gdm, too...

I can print from FF but when I open a pdf document it won't print from that :-( ...

i really don't know, i don't mess with Sata... all of my drives are IDE...

i've actaully never installed anything in linux before always used ports types of installs

how many drives do you have inside your PC?

look for the line id:2:initdefault int /etc/initab and change it to id:3:initdefault

TheCougar, ahhh you should try to use the Synaptic tool or apt-get or aptitude to install things in ubuntu...

idefixx I use ubuntu server, thing is I installed ubuntu-desktop for some configuration pupose

I have an Asus M2R32-MVP mobo with a single SATA drive. It has 2 NTFS partitions on it already, and over 100 GB of free space

synaptic tool?

TheCougar, in System-Administrator menu there should be an option for Synaptic

well im not the best person to help you with that.. since i never used ubuntu server, and from what i know on that issue (not much) server host does this kind of stuff very different.

TheCougar, use the search option in Synaptic to search for synergy

Indygun, that free space is unpartitioned and not formated

i don't know, doesn't make any sense

Where can I find the httpd.conf file for apache in ubuntu? I checked the one in /etc/apache2/ but it's empty... I want to enable the mod spelling

why won't it print from the pdf document ?

ok.

hi folks

A question about rss-feeds. I just installed Liferea and when I click one of the news in it I get like two rows of text and when I click it Firefox opens the real article. Isn't there a way to have Liferea show me the entire article right away and just read all news there? Or is rss just a "oh-there's-something-new-on-this-page-i'll-go-check-it-out-then"-thing?

any nmap users here?

I'm going to sleep on it for now! Thanks for trying though

is there any "mouse gestures" program for ubuntu?

you might try downloading and burning the current version of Ubuntu

Peace out, all!

not that I'm aware of...

Linux_Scrub, bye

7.01

you said you had dapper..
7.04 is current

or 7.04 even

sometimes rss feeds are shorter versions of a full article, it depends on the feed, most that I read are more than 2 lines though.

I'll give that a try. I though I do have the CD with 6.06 in hand

i use kununtu 6.06 and 'nmap -sS -T4 -O scanme.nmap.org' breaks my internet connection after few minutes
whats the problem?

well, thats about a year and a half old.

i use adsl modem and dlink ethernet card

SATA has been out that long hasn't it?

mrobbert, ok thanks. that's too bad, you should get the full article right away, less clicking that way

hello!! everytime when I change the device from vesa to FGLRX i got a black screen.... What's the problem??

yes

hello everyone

i think so..

visham, is your isp watching you and saying "no"

no my isp is dumb

thank you

I think that there is an option to download the full web page, but most feeds don't need that.

Also had a question about Linksys wireless card. There isn't any WPA support in the network settings for the card?

Does anyone know ?

Linux_Scrub, get the live CD and test your hardware

there is w/ WPA Supplicant

can anybody tell me how i can get and install xmms2 for ubuntu 7.04

!wpa

TheCougar, no problem Synaptic can also be used to uninstall software that you decide not to use... have fun!

xmms2?

Wireless documentation can be found at https://help.ubuntu.com/community/WifiDocs

Corvinis-V: httpd.conf isn't used in apache2

!wpa

is there some low level packet handling stuff that freezes my ethernet card

I am corious abaout one thing.If manually install latest Nvidia drivers my xorg after reboot dont' work.Is it becouse driver, system or mybe something else????

sorry no - zapomnialem zmienic nicka z tej amandy

yes xmms2 the second edition of xmms player

has similar problems be reported

does anyone have any information about the issue with the D-Link DWL-650 wireless card (prism2 based) that broke in feisty?

visham, check launchpad.net for your hardware

Corvinis-V: you can add options to it though, as it still gets read by httpd at startup

didn't know there was a 2nd edition, thats all, i knew the first one was no longer upgraded/supported, so i switched.

my guess is the the ethernet card is unable to handle the load nmap generates

www.xmms2.org

am i correct

one last thing. i delieted the bar (panel?) at the bottom of my screen and have not seen where to put it back on. any suggestions?

how do i recompile linux-restricted-modules?

what player i can use? Because i want to stream music in mp3 format to a shoutcast server

sudo apt-get install linux-restricted-modules

ha nevermind greyfrog found

i have no idea

Thanks again for your help folks!

TheCougar, cool where was the option

Bye!

for both no idea

visham, that should not cause a freeze, unless you have some silly card, and really without access to the box how is anyone going to know and the theory is a bit strange, as the stack should not try to drive more than the card can take

on the bar at the top... now if i don't delete both i should be fine

jadu_, have you looked at VLC? It is supposed to handle most media codecs and has lots of network support

TheCougar, lol, cool... thanks for the info

but does it stream?

VLC sucks, use mplayer

no i dont know a linux version of it

i accidently deleted the multiple desktop thing on the bottom one and in my attempts to figure out what addon for the panel it was i deleted the panel lol

you're crazy..lol,

mplayer?

yeah

TheCougar, at least it was an easy fix

what plugin do you need to stream?

any other reasons why nmap breaks the connection

mp3

mplayerhq.hu

heelo!! Everytime when I change the device from VESA to FGLRX I got a black screen.... I'm using Ubuntu 7.04 and my videocard is an ATI X1300...

or is there a bug in nmap itself which is unreported

nevermind

I have "jeff ALL=(ALL) NOPASSWD: ALL" in my /etc/sudoers (edited with visudo), but sudo still sometimes asked me for my password. why?

why can't I write anything to my windows' NTFS partition from ubuntu?

mplayer is a videoplayer

(it's mounted to /media/disk)

!ntfs | aMMuNix

To view your Windows/Mac partitions see https://help.ubuntu.com/community/AutomaticallyMountPartitions . For write access see !ntfs-3g or !fuse

visham, lots of possible ones, search for it on launchpad.net

!ntfs-3g

ntfs-3g is a linux hosting driver which allows read/write access to NTFS partitions. Installation instructions at https://help.ubuntu.com/community/MountingWindowsPartitions

i tried it already
ompaul:without a solution to my problem

visham, so report it then

i wouldn't trust ntfs-3g. hosed my windows partition twice

hi all!something's wrong with my gnome baker!!!don't have idea whats wrong!can't burn cd images as it should???any known bugs???how to fix them?

i even checked various setting on my ethernet card and ran nmap under each condition but no solution

http://www.seagate.com/support/disc/ata/st340824a.html -- anyone know why this HDD is not allowing my Ubuntu to start installation? -- gives me that darned /bin/sh : can't access tty error.

Can some one paste bin there /home/username/.fluxbox/menu for me?

if you're desperate just boot to windows and get an ext3 partition reader for windows and copy that way

hi, i have installed ubuntu but there is no wget command, how do i install it?

visham, please go to launchpad.net or the nmap site and compile the latest and see if it happens then report the bug you find

dose any one know how know were to get this
gaim_pt
plug in for gaim

on one occasion dmesg show that the interface eth1(ethernet card) is in promiscuous mod
on one occasion dmesg show that the interface eth1(ethernet card) is in promiscuous mode
what does that mean

visham, it is listening to all packets

cant finde it

hi, i have installed ubuntu but there is no wget command, how do i install it?

anyone know how to get a '#' character form a MacBookPro keyboard running ubuntu?

thank you

psst, how did you just type it

F00BaR, sudo apt-get install wget

in MacOS X

apt-get unknown command

!packages | F00BaR

You can browse and search for Ubuntu packages using !Synaptic, !Adept, "apt-cache search keywords", the "apt:/" URL in KDE, or online at http://packages.ubuntu.com - Ubuntu has about 20000 packages available, so please *search* for an official package before installing things in awkward ways!

apt-get unknown command

F00BaR, make sure you have permission to install software ... like are you the first user set up on the machine?

foo you know were to get gaim_pt

well, installing on my usb failed

sudo apt-get

hi. does anyone has any problem with ntfs-3g on an internal hard disk? When I do a touch, I am getting an error - touch: cannot touch `/media/sda2/1': Input/output error. It was previously working for me with read+write access. I can still write to external NTFS disk partitions..

i'm tired of helping noobs.. man, people gotta learn how to google sometimes.. most questions are how do i install, how do i run

red can you helpm a sec

i mean people write manuals and guides for a reason

lol Azu good one

not because they just wanna write
they want others to read

for a second, I thought you were serious

so rtfm

Azu1, and some people come to IRC first...

bac or az can you help me for a sec

you just end up scaring people away from ubuntu and linux saying those things, though

whats up raymond?

Azul, why is that bad

bac im looking for a gaim plug in called gaim_pt\
cxant finde it on web

where's the actual httpd.conf located in ubuntu? The one in /etc/apache2/ is empty

cant

spricht hier auch jemand deutsch?

I want to enable mod_speling ....

no, people gotta understand that they have to learn and read a lot before they can use linux efficiently.. besides, i don't care if someone doesn't have the patience to use linux

!de | kamikaze_

Deutschsprachige Hilfe fuer Probleme mit Ubuntu, Kubuntu und Edubuntu finden Sie in den Kanaelen #ubuntu-de, #kubuntu-de, #xubuntu-de und #edubuntu-de

wow raymond, if you cant find it on the web, then I dont know
I have never heard of it.

!de | kamikaze_

az i love liunx and learing a lot
bacon i want to run pal talk and cant

romaneste?

i mean, there should be some real good questions that everyone really could benefit from

Corvinis-V: apache2.conf is the default config file for apache2. you can add options to httpd.conf and they will be read by httpd when you restart the http server

not how to install linux
or how to mount ntfs

If you can't find it on the web how do you know that it exists?

az yep
it shows meny site mro and nothinbg point to get it
menchen it

does ubuntu have some video editor? i want to delete one part of video then upload it
i mean some what is already in ubuntu, or if there isnt, anything suggested ( not that hard, all i want to do is crop )

Azu1, if you are referring to me about mounting ntfs.. please read it again i said "hi. does anyone has any problem with ntfs-3g on an internal hard disk? When I do a touch, I am getting an error - touch: cannot touch `/media/sda2/1': Input/output error. It was previously working for me with read+write access. I can still write to external NTFS disk partitions.."

everyone has to start somewhere. if these people are coming from windows they don't know what it means to mount a partition or what a partition is, usually.

believe me sometimes someone says how to do this.. i got type it in google and the first hit answers his question pretty thoroughly and very well

Some help with installing a splash screen?

Azul, you've never asked a question that wasn't answered elswhere?

i end up google for lazy people

az i looked thewre

Do you know how to enable the mod_speling in ubuntu ?

befor i came here

lol @ can't touch

Hello there - I just installed 7.04 on a Thinkpad A31p - I can not get the wifi to work. The driver loads but does not see any networks (there are several about) - I tried the NDIS driver with no luck - Not sure I did Installed the NDIS correctly, though.

as ametter of fact there's a link on asking questions on IRC in /topic. Feel free to ignore those who just look for a b*tch to solve their problem and don't bother to invest effort of themselves

!splash screen

Sorry, I don't know anything about splash screen - try searching on http://bots.ubuntulinux.nl/factoids.cgi

!splash

To change the Gnome splash screen, use !gnome-splashscreen-manager or change the GConf key /apps/gnome-session/options/splash_image using !gconf-editor.

then give them a link the article you found in goodle. that way they get an answer and are nudged into the "i'll search for myself next time" direction

how do i start ssh

!usplash | sahil

To select the usplash artwork you want, use "sudo update-alternatives --config usplash-artwork.so && sudo update-initramfs -u" - See https://help.ubuntu.com/community/USplashCustomizationHowto for adding your custom artwork

you have a good point, but google doesn't tell me how to type a pound character on an MBP kbd in ubuntu

Corvinis-V: no, i can't say that i do. you should be able to add whatever lines you would normally add to httpd.conf to get it to work

whats a good ipod thing

greyfrog, how do i get usplash

Hmm, so I'm trying to install grub on my USB drive, but, it isn''t working

i have ipod shuffle how i use it on linxu
linud

i just wanna say i wasn't pointing to anybody

linux

amarok probably

amarko whats that

hmm seems that my bash is fuxored

sahil, sudo apt-get install usplash

i heard it supports ipods, but never tried it cuz i ain't go one

an ipod thing

amarok is a music player that has ipod support thang

COMP_WORDS: bad array subscript

i dare say it's not apparent to me my question implies i don't google..

how can i fix it?

pdst yes what good i saw meny in adde remove

how do i start ssh

but not sure whats good
psst i mean

a server or a client?

into a terminal prompt

heelo!! Everytime when I change the device from VESA to FGLRX I got a black screen.... I'm using Ubuntu 7.04 and my videocard is an ATI X1300...

-l login name

it'll ask for password after this line

how di i start the sshd server

pss what good fof ipod in linux
i see meny there to add remove

after you install it it should start automatically

You know, I'm still getting the "the ext3 file system creation in partition #1 (sda) failed"
its weird...

what?

azu1 talking to psst

any one here use ipod

type ps ax | grep ssh
in the list you should see /usr/sbin/sshd

hi!

here
?

/usr/sbin/sshd

then it should be running

amarok

nope
its not

psst whats that
?

ola

it's not in the list?

i think i told you to use amarok

psst you got ipod

ahh
yes it is
sorry

then it is running
what problem are you havving with it?

was just responging to raymondjtoth's quesiton "what's amarko(sic)"

ok psst
psst you use a ipod
?
psst see my q

Can someone help me to set my ethernet connection to an adsl modem (dhcp) under feisty, it says I'm connected, but I cn't even ping any ip

I put 200 hours of radio programs on my iPod and then never connected it to a computer again

psst is one you and az told me good
?

subjective

psst what mean
?

try it, then tell me how good it is

psst whats a good rss reader
i saw meny in add remove also

i'm trying to update my /etc/exim4/exim4.conf - i am using the conf.d multi-file style configuration. I run update-exim4.conf, but it generates some file in /var/lib - do i have to move it to /etc/exim4/exim4.conf to get it to work or what?

firefox

Do you know that the DSL modem is connected to the internet?

psst reason im asking is newbe q
psst want to put it on my ipod
cant with firefox

oh - no idea about rss readers for ipods
didn't even know that was possible

psst no to download rss to add to ipod

ipods aren't even net-capable, are they?

The configure script must be executed before running 'make'. , what the hell that means ?

so i can download the rss and then inport it to ipod rss
graft no there not

when compiling run ./configure && make
after that's done run sudo make install

anyone know about exim4.conf?

thanks , ill try

so what exactly do you want to do with ipods and rss?

ola

ola, sbenitez

graft want to add rss download to it

ola yeni

need to download rss

i do not comprehend that of whic hyou speak... what do you mean 'download rss'?

graft get rss feeds once the mp3 is downlooaded them add it to ipod

silly question probably, but is it possible to have a active running matrix screen (all the little green lines of code) running instead of the Ubuntu normal boot screen with the orange bar?

just do it like with a normal mp3, eh?
do you mean podcasts?

graft yep
graft what a good software for it see meny

http://www.newlinuxuser.com/howto-use-amarok-to-listen-to-podcasts/

kjjjk

never used one myself, not having an ipod, but amarok might be good

!usplash | sahil

just looking up host grsft
graft page hasnging
ng

!nvidia | linxuz3r

hanging graft

Pici, i know that, but is it possible to have it animated?

upstart vs runlevel 0-1 Im changing to debian, upstart sucks

hello

no one knows bout exim on here? surely someone must...

Hello

I dont know, sorry. I dont think its possible at this time.

how are we with nvidia drivers?

i like them

Pici, thanks for the clarification.

after installing the restricted drivers on feisty the only mode available is 640x480

ok graft dose ipod i see
well see
soonb

despite the fact that he modes in xorg.conf are the same as they were before the driver was installed

is it using the restricted drivers?
or is it failing and defaulting to something else?

in your /etc/X11/xorg.conf file go to the screens section and make sure that there are other resolutions available there, if not add them next to the 640x480

graft what a resticted driver i have one

I changed all edgys to feistys in sources.list and ran sudo apt-get update and sudo apt-get dist-upgrade, but it got stuck in installing console-setup: * Setting up console font and keymap...

i wasn't talking to you, baby

in dapper, how do I change from gdm to kdm using only the command line?

graft ok

remove gdm and install kdm

kdm is already installed, but when I do /etc/init.d/kdm start it says that it can't because gdm is set at default

can someone help me with this? http://www.banshee-project.org/Guide/DAPs/MTP

phalcon, did you miss my original post or were you talking to someone else?

what is a an appropriate channel to discuss tunneling and port forwarding?
!ssh

SSH is the Secure SHell protocol. See https://help.ubuntu.com/community/SSHHowto for usage. Putty is a nice SSH client for Windows; it can be found at http://www.chiark.greenend.org.uk/~sgtatham/putty/

graft, the restricted driver is enabled

missed it, sorry

Hello , can anybosy advice me "dock" (you know like mac os x menu) soft ?

GAAAAAAAAAAAAAh how do I boot in standard runlevel 3===??

what's crakin

sorry, again. heh

I'm not sure if there is an official Ubuntu way, but you can edit /etc/inittab

If you want to stabilize the modernization work or leave me the following error :E: Some index files failed to download, they have been ignored, or old ones used instead.

Hi guys - I have two ethernet controllers on my mobo, but the internet only seems to work on one. I need it to work on the other so I can use internet connection sharing. (Using ubunto 7.04 fiesty) (Lanparty nf2 UltraB mobo)

look for a line similar to "id:2:initdefault:", should be near the top
That number is the runlevel that you'll boot to. Funny thing is that mine is set to 2 and I have gdm running on boot

A buddy of mine has a broad band connection, and is willing to DL Feisty for me, but has no clue how to do it. Anybody have link for an easy howto?

runlevel 2 is default and 2-5 are identical

how
how to dowload ??
you don't know

how to download? just go to Ubuntu.com

Hm.. Ubuntu isn't recognizing my printer. It's an HP Photosmart C5180 All-In-One. It recognizes the scanner, but for some reason not the printer. Any ideas?

!install | n2diy

If you want to stabilize the modernization work or leave me the following error :E: Some index files failed to download, they have been ignored, or old ones used instead.

Ubuntu can be installed in lots of ways. Please see https://help.ubuntu.com/community/Installation for documentation. Problems during install? See https://wiki.ubuntu.com/CommonProblemsInstall and https://wiki.ubuntu.com/DapperReleaseNotes/UbiquityKnownIssues - See also !automate

how did you find this channel ?

I forget?

if you can use irc you can use the web - did you not look at ubuntus website ubuntu.com ?

Thanks, all, I'll RTFM.

please
If you want to stabilize the modernization work or leave me the following error :E: Some index files failed to download, they have been ignored, or old ones used instead.

what are you talking about ?

Administration the Install option . By folloing the install whil it install the ubuntu version wich I have on the flashdrive wich settings .... ??? If not what would you sugest to create a install ubuntu in a form in wich its costumizeable trogh time?

anyone know the solution to TSSTcorp TS-L632D halt problem?

I've had a hard drive in my system for months that hasn't been used. I just did an fdisk on it. Should I reboot before mounting it?

what problem
nah

If you work update. Leave me the following error:E: Some index files failed to download, they have been ignored, or old ones used instead.

Hm.. Ubuntu isn't recognizing my printer. It's an HP Photosmart C5180 All-In-One. It recognizes the scanner, but for some reason not the printer. Any ideas?

are you trying to update packages ?

the help isn't for me, it is for my friend, who isn't literate in these things, and I don't have access to is computer. Never mind, I'll dig it up.

Is there a way to mount a CD-ROM so that all filenames are uppercase?

yes

http://openprinting.org/printer_list.cgi

yes - then YOU should be able to tell him without asking in here
no

change your ubuntu repo to a different one

Maybe I should teach him how to use IRC instead?

no - maybe you should just tell him the answer
you knew to look on ubuntu and yet still asked - or you didn't know - its up to you

Or,... maybe I should get broad band?

you knew to look on ubuntu and yet still asked - or you didn't know - its up to you

hello

! repeat | ikonia

Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. You can search https://help.ubuntu.com or http://wiki.ubuntu.com while you wait. Also see !patience

I need some help

!don't be lazy | n2diy

Sorry, I don't know anything about don't be lazy - try searching on http://bots.ubuntulinux.nl/factoids.cgi

go for it

i installed xfce and now I can't make gnome the default session

how did you make xfce default

I have the required drivers and such. By all rights, it should work but for some reason.. it isn't being seen.

so wheres a guy supposed to get breezy updates now a days

How do I get the water effect to work in Beryl

i thought they would be avaliable for like 3 years for the server OS

from the breezy repo

ikonia, the truth is that I didnt

see if it's detected at all in dmesg

who did

!effects | jpatota

can you point me to a sources.list

For help with Beryl or Compiz desktop effects, please go to #ubuntu-effects

no one,

its already there on a breezy install
so why is gnome not the default

so I have to make a mirror directory for the CD filled with uppercase links to the lowercase filenames? Annoying...

http://64.85.161.167/vhcs2/ - why doesnt it come up with the program?? Why does it show this?

thats not a great idea

ikonia, that is what I want to set

im trying to recover GRUB using the guide on the wiki. However, when i type in "grub-install --root-directory=/mnt/root /dev/sda" it just stalls forever (My linux partition is on /dev/sda2 which is mounted to /mnt/root). What to do?

gnome is the default on ubuntu

im looking at http://archive.ubuntu.com/ubuntu/dists/ and seeing no breezy

!sourceomatic | jpatota

source-o-matic is a webpage where you can (re)generate your sources.list - http://www.ubuntu-nl.org/source-o-matic

ikonia, yes but its not default on my system anymore

do you have a breezy bo
why not

have you got a better one? I can't change the contents of the CD...

ikonia, I cant set it

gnome is the default on ubuntu - so if its not you've changed it, what have you changed
why do you want all uppper case ?

it doesn't run a program cause it's a web directory. do you just want it to show a web page?

ikonia, It must have changed it itself, the problem is how do I set it back

its suppost to

because there is a directory file (DICOM standard) in the root directory that references all the CD content as uppercase files.

its suppost to be a control panel

things don't change on their own

ikonia, I don't care who changed it, I just want to change it back

go into the gui directory

explain a little more sorry, you have an app that references the CDROM but in all upper case

yes

I do care as I want to understand why its changed to tell you have to change it back properly

my friend wants to install xubuntu on his laptop, but his cd drive doesn't work and he can't boot from usb.

i mean, you go into the gui directory in your browswer....a login screen comes up

harry unless you have an install server and pxe boot - your out of luck

damn. he got locked out of the bios, too...

no, the CD follows a standard called DICOM (medical imaging). That means it is accessed via a binary file in the root dir called DICOMDIR, which contains references, which don't work on Ubuntu because it insists on lowercase names.

phalcon, hmm, how do i fix it....

ubuntu mounts the cdrom with the files as it is on the cdrom - so thats how it is. I suggest you copy the contents of the cd off somwhere and use sed to change all the file names

needless to say, the DICOMDIR file was created with the assumption of a case-ignorant operating system

it doesn't look like it's broken

is this wine at all ?

just checking

i think you just want to go to /vhcs2/gui instead of just /vhcs2

unusual that a unix os would be case insensitive as all unix os's are

well, it's obviously not made for a secure unix web hosting os.

My resolution on the client is the same as the server, so I have to scroll around sometimes to see what I'm after. Once I scroll down though, I can never scroll back up. Have to shut down the session and fire up another if I need to do something LIKE OPEN THE FILE MENU! Anyone heard of this?

how do i make http://64.85.161.167/controlpanel go to http://64.85.161.167/vhcs2/gui/

then hows it going to run ?

i thought they were case sensitive. i know linux is

they all are - thats what I just said

it's not going to "run", it's a data CD.

ahhh that makes sense

:ikon you said insensitive

re-read

with sufficient ill-will, you can misread ikonia's line

Does anyone know the situation regarding O'Caml 3.10? It's been out for a while and Ubuntu is stuck on 3.09

indeed, i did.

thats the best I can think off, copy the cd off and then use sed to change it

It includes a new build tool (ocamlbuild), otherwise I wouldn't care

I said I can't believe anyone would design an app for a unix os thats case insensitive

not sure what you are doing, but I've been able to view dicom images using some app in the repos

sigh, I'll try Mac OS first

bsd - case sensitve

i gotcha...it's just the wording that threw me off

no problem

thanks

???
I didn't do anything

I upgraded kernels and there are now two boot options for secure linux web hosting in my GRUB. How do I remove the old kernel and the GRUB entry?

I installed amide, but it can't deal with dicomdir files that reference uppercase files. (They appear as lowercase on ubuntu because of the way that ubuntu maps iso filenames)

use apt-get remove to remove the old kernel image

Strange, Mac OS X shows the CD content with uppercase filenames

thats surprising

hmm I think I used xmedcon, but I just converted the files to .png with it, you may want to do something else

If I upgraded, would the upgrade remove the old kernel image or do I need to follow your instructions to remove it manually?

use apt-get remove to remove the old kernel image

well, I suspected that it's not the OS as such that matters, but the iso9660 filesystem implementation.

yes, thats a reasonable assumption

whoever sujested virtualbox
you rock

there is an option to force complience at mount time

xmedcon is a good idea, I'll just bypass the dicomdir with that. Thanks.
I've found norock,map=o -- doesn't make a difference

shame

Hi! Can somebody please tell me or post a link how to get boinc running as a screensaver in Feisty Fawn?

what part are you stuck with

If I upgraded, would the upgrade remove the old kernel image or do I need to follow your instructions to remove it manually?

use apt-get remove to remove the old kernel image

I can't remember giving you any instructions, but kernel upgrades generally don't uninstall old kernels. Your new kernel will boot nevertheless, because the upgrade procedure activates it in the grub config.

Sorry, I'm just somewhat new to Linux.

I've told you 3 times

I can't put it as a screensaver

and you've just repeated the same question 3 times

Ok, I'm sorry.

ubuntu uses xscreen-saver for screensavers

thank you for your help

well, how can I configure it to run on backgroud?

in the background or as a background wallpaper

doesn't matter, I wan't it just to run

it does matter, what do you want

I wan't it to run always

where and how
what do you want it to do

when I start computer it should start and run on backround unless i kill it
please tell me!

define "run"

do its tasks

Okay, one question. What do I do to get Ubuntu X86-64 to install and dual boot with my vista partition?

hi, is this the proper place to ask about a potential bug linking against gnu libraries on ubuntu?

ask away
put the install cd in - boot it click install

hemuli, you probably don't want it to run full speed the whole time?

well, maybe not, I'm not sure

download the amd64 Desktop CD image. Boot from it and install. It'll setup dual boot automatically, unless you tell it otherwise. See also the private message from ubotu:

vader1102

I'm just hoping it could do some calculation on background

I suggest you just launch it from the command line or put it in your .bash_profile and put a & after it to background it

ty soundray

isnt brezy unsupported now anyway?

I burned an iso in my cdrw, located in /dev/hdd, but when I try to eject, I get this error: Error: mount point /tmp/disks-conf-hdd is not below /media/

no more packages are avaliable right?

do you have a breezy box ?

Hello, Is there a Way to have the Disks option like in teh Older Ubuntu

unmount of `/tmp/disks-conf-hdd' failed"
oh damn

the problem i am having is with binutils. i have two versions of the library: the one installed by default, which lets call 'binutils-native'. I also downloaded binutils-source from ubuntu and built the .tar.bz2 file using "./configure && make", which let's call 'binutils-build'. when i link my application against binutils-native, i get different output than when i link against binutils-build.

the one that shows up in Admin

i do

of course you will get different results

do I launch boinc-client and not boinc-manager?

um, why would i get different results? they should implement the same api

just do an apt-get update and an apt-get upgrade and see what you get
different versions, patches applied etc etc
what are you trying to do
eg: whats your goal

my GAIM window is refusing to resize horizontally (it's stuck at full screen width) any ideas?

!video

Ubuntu 7.04 installs multimedia codecs automatically. For older versions of Ubuntu, or if you can't use the automatic installer, see https://help.ubuntu.com/ubuntu/desktopguide/C/common-tasks-chap.html - For multimedia applications, see https://help.ubuntu.com/community/MultimediaApplications

right now my app works fine when someone downloads binutils and compiles from source. always. for 2 different versions of binutils. when i link against the native ubuntu libraries. specifically, this is libbfd.
i want it to work fine when people link against the native library

Disks on 7.04 or is there a alternative?

""" Error: mount point /tmp/disks-conf-hdd is not below /media/ : eject: unmount of `/tmp/disks-conf-hdd' failed """ This hasn't happened before. What gives!?

first thing to do is check the versions

that is why i installed the binutils-source package and linked against it

thats a mount point un mount it first

but i am not sure how to apply the patches

patch is the command

someone here using duplicity (feisty) and had problems with incremental backups? it always does full backups instead of incremental ones

thanks, I think I got it now!

binutils-source installed a patches directory, and binutils...tar.bz2. i unzip/untar binutils fine. how do i apply the patches in the 'patches' directory. they look like shell scripts...not patches

I get a "cannot unmount, device is busy". Why is it mounting there in the first place?

Thank you, what you said worked

look at the scripts
do you have any windows open that or in or looking at that directory

almost always does

yes I do. I'm an idio. 1 moment

is there a way I can change the text color of the Menu Bar? my task bar is already black, and it makes the text on the menu bar impossible to read

please help

actually, I started irssi from that directory. oops. BRB

look in the config file for the append line

.config?

I am trying to connect to a mobile phone via bluetooth (an S60 phone with Python). I've seen on WinXP that people can connect to the phone via the Hyperterminal program using bluetooth; how would I do something similar on Ubuntu?

or the menu with a make menuconfig or make xconfig

Any advice on how to make a text editor look pretty on GNOME? I want a dark theme that will lessen eye strain, and that will have well chosen pretty colors for syntax highlighting.
uAny advice on how to make a text editor look pretty on GNOME? I want a dark theme that will lessen eye strain, and that will have well chosen pretty colors for syntax highlighting./u

Okay, the drive unmounted now. Thank you

well spotted

a similar program is minicom. I don't know if you can emulate a serial connection over bluetooth, though.
!minicom

Sorry, I don't know anything about minicom - try searching on http://bots.ubuntulinux.nl/factoids.cgi

!info minicom

friendly menu driven serial communication program. In component main, is optional. Version 2.2-4build1 (feisty), package size 164 kB, installed size 1112 kB

thx

!menubar

there's nothing like that there

Sorry, I don't know anything about menubar - try searching on http://bots.ubuntulinux.nl/factoids.cgi

!menu-bar

there is

Sorry, I don't know anything about menu-bar - try searching on http://bots.ubuntulinux.nl/factoids.cgi

i did a grep for ubuntu1 in .config, there's only a comment at the start of the file

hi i have problem with the install of ubuntu ...

check the output of make menuconfig - look at the options

Yes zerro

what's your problem?

i have 2 x 250gb hdd in raid and ubuntu install program will see both hdds and no one as a raid array

Ah ok, I just installed Amarok.. it hung once and now won't open again??

yup thats fine

Try reinstalling it

it says "Ubuntu 2.6.20-16.29-generic" in arbitrary version signature

you need to use the server cd to do a raid install - or NOT use fake (windows hardware) raid
yup and every time you build it will increment the build number

so how do i fix it? there's no ubuntu1 there

it shouldn't matter as your kernel/modules etc will always look in /lib/modules/$kernel_version
but the option you want is visable in make menuconfig

Hi everybody... I compiled and installed Qt 4.3.0 on Ububtu 7.04 today.. but the fonts in Qt4 Apps seem un-antialiased.. how can I fix this?

why did you compile it and not use the version from the ubuntu repo

when it builds the initrd it looks for files in /lib/firmware/2.6.20.3-ubuntu1 which obviously aren't there so the build fails

because I compiled Qt 4.3 for my other Linux boxes..

so either re-make the initrd, or look in make menu config for the option I have mentioned a few times
and ?

thats it.. I am used to compiling from sources.. am very new to this whole apt-get stuff

i looked at the option and the string 'ubuntu1' is not there, so i can't remove it

well chances are you will have broke your package manager dependency tree
don't look for ubuntu-1 look for the options that append to kernel builds

what shall I do now?

err how do I permanently change my nickname on here?

what ever you want

hi everybody....i have this problem http://ubuntuforums.org/showthread.php?p=2815088#post2815088

join #freenode for irc lessons

if I want to apt-get Qt 4.3.0 what command should I use?

use sypatic pakage manager and search for the latest available verison

whats the entry called "eth1:avah" in ifconfig??

oh cool thanks

is there a runlevel 3 in ubuntu?

wireless normally
yes

and if i dont have wireless?

ikonia, as a normal linux system?

ubuntu is normal linux
then its a network card brand

runlevel 3 isn't non-X mode like redhat etc

hey, usplash only changes the splash image when the computer starts up. Is there a way to change the boot screen?

what boot screen ?

roryy I know, but I can't start it...

is anyone here LPI-Ubuntu certified?

you can do something like 'sudo /etc/init.d/gdm stop' to kill X; 'sudo /etc/init.d/gdm start' to restart it

what are you doing to start it
I am LPI

ok thanks.. got it

ikonia, how did you find it, im studying for 101 & 102 at the moment

easy

I want to run it as a server, in runlevel 3

getting error 2 when installing "make"

ok
will you go for the Ubuntu 199 test?

ikonia, when Ubuntu starts up after you choose it from the list of the operating systems. It says Ubuntu with the logo and there is an orange bar at the bottom

run level 3 doesn't mean a server
yup
probably no

oh ok

that means nothing

ikonia, I know but it starts without a GUI

er.... what if i have eth1 and eth1:avah?

no it won't

so how do I set runlevel 3 to be default

ikonia, you know how i can change that screen and the screen where i choose the operating system

you need to disable gdm from run level 2

ikonia, on a normal linux system it would
thats the thing, ubuntu has these strange runlevels

yes, thats a grub splash image

(eht0 and eth1 are ethernet ports on the motherboard, from the nvidia controller) but i have no idea what eth1:avah is

not nessary - run levels are defined on an OS basis

it's the same in debian...

ikonia, you know how to change it?

does any body know where i can find drivers for onboard mirage 128mb on a pc chips a31g

download a grub image and put it in the grub dir and add the splashimage line to grub

ok, so how do I start it with a terminal prompt only?????

there's a bitmap defined in your grub config file, you have to change that

I've told you disable gdm in run level 2

services, disable graphical login

is it just me or has isapnptools suite been take out of the mirrors?

ikonia, and how do i change the place where i select my OS

ikonia how do that?

good up on grub
jrib just told you
or the same as any other linue
remove the init script

ikonia which one

ikonia:- this is to do with usbvision....i can't create "make"

my mobile can see my computer. but when I try to pair devices the mobile phone is prompted for a passcode, but I don't know where to configure or find the password on the PC

gome on !
come on

How do I execute a .bin file?

you don't "create " make
./$file

ikonia:- i have put da usbvision in my home directory.....i then cd to usbvision/src then said sudo make

1234 (/etc/bluetooth/hcid.conf)

your either missing headers or more likley its not compatible with your current header version

ikonia, that isn't working

soundray, thanks!

what does it say

ok guys

how do i "diagnose" an network device?

how do we fix this

anyone smart n sexy here that have a webcam? I need help setting up my webcam and if you do I might cyber with you... plzzz I'm desperate get my cam up need muh vids

fix what ?

ikonia:- what do u type in the terminal to know what headers u have installed at the moment

vmware on ubuntu

when i try firestarter internet connection sharing on eth1 it says its not ready

you have 2.6.20-16 headers
is eth1 setup ?

do uname -a to see which you need

I am having problems with the Form wizard in Open Office.org

ikonia, Permission denied

that doesn't show you the headers

sorry, what do you mean?

are here any ebuntu guys ?

ls -la the file and see if you have permissions

you need headers that match your running kernel

no you don't

eth1 is connected to a laptop running winxp

does it have an IP - is it using a cross-over cable

uh huh uh huh :P

how do i find out how ubuntu build a package (e.g., what configure options were used)? in particular, binutils-dev

no you don't need matchign headers

ikonia:- Package linux-kernel-headers is a virtual package provided by:
linux-libc-dev 2.6.20-16.29
ikonia:- You should explicitly select one to install.
Package linux-kernel-headers has no installation candidate

I told you the header version you where using

'apt-get source packagename', then examine the files that are downloaded.

How to get rid of sounds in Gnome its very Windowish yuk!

that won't give you the config options

When I click Finish in Form wizard of Open Office Database it does nothing. I need help.

my mistake - apologies

mmmmm...... the laptop connected to eth1 is setup to get an ip automatically (I was trying to run dhcp3-server here, but it fails to start...)

re-read

i should set up the ip on the laptop then?
*manually that is

apt-get linux-headers-2.6.20-16

holas

I mean apt-get install linux-headers-2.6.20-16

depends if you are using the dhcp server its up to you

alguiem habla ingles
español perdon

he already has it installed

ikonia, kk, I added the permission and installed it

!es | eve

Si busca ayuda en Español por favor entre en los canales #ubuntu-es, #kubuntu-es o #edubuntu-es, allí obtendrá mas ayuda.

Gerro:- linux-headers-2.6.20-16 is already the newest version.

then what wrong with it?

0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

the versions he's using against have some incompatible functions

do you know where dhcp3-server store its logs?

the syslog

*bump

I also have the -generic ones

he's using generic
2.6.2-16

apt-get source gets me the source, but i don't see where it specifies how "configure" was run.

2.6.20-16

Gerro:- so where does Error 1 and 2 come from? http://ubuntuforums.org/showthread.php?p=2815088#post2815088

look in the package
I've told you

um
why does xchat always crash when i try to connect to freenode

System/Preferences/Sounds

(i'm on GAIM now)

apt-get source gets me: binutils_2.17.20070103cvs-0ubuntu2.diff.gz, binutils_2.17.20070103cvs-0ubuntu2.dsc, binutils_2.17.20070103cvs.orig.tar.gz. it also applies the patches. but i don't see where it says how configure was run

debian/rules
(you should have a directory too which you didn't list called binutils-morestuff)

have you done the basics and checked the version shipped with ubuntu against the version your trying to build ?

When I click Finish in Form wizard of Open Office Database it does nothing. I need help. I just marked all of openoffice for complete removal and I am going to try and install again

I urgently need a program with which I can mount .nrg images as a DVD drive under ubuntu

nero

under ubuntu ?

yup

well but nero isnt free

nope
but its a nero image

you could try http://www.ubuntugeek.com/howto-convert-a-nrg-nero-file-to-a-iso-file-in-ubuntu.html
convert it to an is

sudo apt-get install nrg2iso

*iso
:

ok and with what can I mount an iso as a drive under ubuntu ?

nope, but you can mount the iso file that it creates

*** The sdl-config script installed by SDL could not be found
*** If SDL was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the SDL_CONFIG environment variable to the
*** full path to sdl-config.
error: SDL = 1.2.0 is required

er...sorry, yeah, you can mount that .iso. trying to do work and read at the same time....heh

But I have SDL 1.2

zsnes is in the ubuntu repo

please don't paste here. zsnes is packaged, why are you compiling it?

because the packaged version doesnt run as good

you're too fast today

nice to beat you for once

NeoGeo64, ZSNES is in the repositories. Why compile?

why compile when you can apt.

yes it does

ok.. ill try using toe repo..
the*

looking for a plugin that makes GIMP easier to use....

how can I mount that .iso ?

WorldDomination (see the private message from ubotu)

cached

NeoGeo64, you must be a gentooligan

nah, he just doesn't listen

is there a way to install winxp after installing ubuntu? all guides i've read say install windows first, but its kinda late for that

Related Topic: